Mish mash and smish smash

So I will try to cover a bunch of time.

So I got back, we had a lot of heat and then it has been mostly pleasant weather wise.

The tree trimmers are still going sporadically. Partly because there have been a few storms through and partly (I think) because it's down to "topping" the elm which is around 120 feet tall. Me personally... it would be a freezing day in hell before you got me up there, it is scary tall. To put it in perspective if you were up where they need to be and fell you would fall about 80 feet before you hit the peak of our roof and that is three stories + the roof up. The guys who fixed the chimney were a bit in awe of the tree trimmers and that guy was sitting on top of the chimney (~40 up) with no safety line!

Oh and we had the fireplaces inspected and "pointed" and a new flue put on one and spark arresters on the rest.

A pause for some Eastern market food porn.

Well that was good for me, you?

OK so we are in the middle of construction and destruction all at the same time. Aislinn is hot to get everything painted AND we needed to do that behind the radiators while they were pulled for the system test. So most rooms have color tests in them now.

And the room that was falling off the house, kind of we needed to jack up and support. Well they needed to see inside the floor to make sure jacking it up wouldn't break the kitchen ceiling. So since that room was tiled and those would break when we jacked it up level I needed to remove the tiles. They came up pretty easy but they were laid on concrete board. Think sheetrock but made from concrete. The folks laying it down were of the "belt and suspenders" crowd (folks who don't trust either and so wear both). And they glued AND screwed it down with determination. That meant basically breaking it all into small pieces with a hammer drill.

So this room

Became this room

And slowly all these little rocks got cleared away

In this bucket

And a lot of sweat

And we got down to the boards and then beyond...

You probably can't see it in this shot but the first three joists are cracked because of the "falling" room.

But then Ray and Ron rode in on white stallions, or maybe it was a car? and ripped open the deck below and put in some posts that could actually hold some weight. They also jacked up the room. It had sagged over an inch on one end and just under an inch on the other. FYI that is a LOT of sag for the five or so feet that hangs over the deck.

Old semi-useless posts.

Though they had replaced older and even less useful posts...

Now with all new and really useful posts

OK next, radiating pain...

Personal nukes are the answer!

WE have been going through a bit of hell with the heating system. The 50% loss of radiators has turned into closer to 100%. Add in some burst feed pipes and... Well the radiators have to go. Actually we can't even find them. That is the other twist. It looked like we would have to buy many new radiators. The catch is that the new ones are pressed metal ones from a german company that look nothing like traditional cast iron radiators. So as the cost skyrocketed we needed to make a decision.

So we went with what passes for renewable energy out here and we are installing a small personal reactor.

It's kind of a new thing and our electrician was a bit puzzled by how to hook it all up.

But he did figure it out. Turns out the lead in the water is great in the cooling loop and keeps the drinking water from glowing after dark. We did have to put in a tsunami wall (new US regulation) though there has yet to be a tsunami on the great lakes.

The little baby puts out 500KW so we don't have to worry about power and the heat coming off the core heats the house nicely. Of course right now it's still pretty warm so we are using some of the juice to power a big ass AC unit in the basement. Every few years we have to change fuel rods but they say you can do it with work gloves if you move fast and it's legal for individuals to simply put the used rods in the trash!

So it looks like we are set for awhile. The big test is Tue. We flip the switch and it either works or we burn a two block whole in Detroit.

I have to go now and get a cowboy hat and practice my Slim Pickens impersonations.

-30-

Buy American...Where? How? I know why.

OK before you think I've gone off on another tangent let me say that there are about three posts in the works so I will catch up on the happs. And this does relate, but wait I digress.

First a question. What is the largest American own brewery? You can ponder that for now I will tell you later.

How it relates? Well one of our contractors, never thought I would know so many.... , was talking about how he tries to always buy American. Not having lived in the manufacturing heartland it was something that I kind of did but not so dedicatedly. Anyway he and his wife went in to buy a car and they had researched it and it was an american car actually made in america and when they got there it was pointed out that the colors had all changed a bit for the models because the paints come from Japan and deliveries had been affected by the disaster.

What? We buy paint from Japan because???

He also said he uses all Hilti tools. Nice stuff but when I looked
Hilti Corporation
Feldkircherstrasse 100
P.O. Box 333
9494 Schaan
Liechtenstein

Liechtenstein!? I thought they made stamps?

My point is that it's very hard to know what IS american made and what just seems to be american made. There are a lot of "american" companies who's products are actually made over seas. Porter Cable was/ is an "american" company but their tools are no longer made in america.

Or are they? Porter Cable is a division of Delta

In January, 2011, Taiwan-based Chang Type Industrial Co., Ltd. purchased the Delta brand from Stanley Black & Decker.¹ Chang Type formed a wholly owned subsidiary, Delta Power Equipment Corp. to own the acquired assets including trademarks, designs and industrial tooling.² Chang Type is moving Delta's production tooling from a Stanley Black & Decker owned facility in Jackson, Tennessee to a facility in Anderson County, South Carolina.³ Bryan Whiffen is President & Chief Executive Officer and Norm MacDonald is Executive Vice President & Chief Operating Officer of Chang Type's Delta Power Equipment Corp. subsidiary.⁴

^{BUT In this article on Black and Decker...}

Black & Decker (the corporation) is distinct from "Black & Decker" the brand; the latter is used by more than one corporation. In particular, "Black & Decker"-branded household products in the Americas (but outside of Brazil) are marketed by a division of Applica, and a Florida-based corporation much smaller than Black & Decker Corporation. None of Black & Decker's power tools are manufactured in the United States of America any longer.

Brands include:
DeWalt
Porter-Cable
Delta Machinery (sold)
DeVibiss Air Power
Kwickset
Baldwin
Weiser Lock
Price Pfister
Emhart Teknologies
Oldham Blades
Black and Decker Firestorm
Vector
DustBuster

So it's just darn confusing since IF Porter-Cable is actually a division of Delta then it's a Chinese (not PRC) company that is making the products in the US, if not it's an "american" company making it's products outside the US.

Which is the more "american"? Personally I would have to go with the chinese company as being the more "buy american", and that is just plain weird.

OK back to the beer question.

Anheuser-Busch, right. I mean BUDWEISER, BUSH, MICHELOBE, BUD LIGHT. What can be more american.

Well, actually in 2008 they were bought by Brazilian-Belgian brewing company InBev.

OK so then it must be Miller, another American giant.

Hmmm, The Miller Brewing Company is an American beer brewing company owned by the United Kingdom-based SABMiller.

But there is more. On 1 July 2008 theMillerCoors company was formed as a joint venture with rival Molson Coors to consolidate the production and distribution of its products in the United States, with each parent company's corporate operations and international operations remaining separate and independent of the joint venture.

MillerCoors? MolsonCoors??? That just killed the other contender also.

But what is SAB?
Miller was acquired by South African Breweries from Philip Morris for $3.6 billion worth of stock and US$2 billion in debt to form SABMiller, with Philip Morris retaining a 36% ownership share and 24.99% voting rights.

OK so all the icons are owned by Brazilian, Belgian, Canadian, South African super conglomerates. Who is the largest american owned brewery?

Samuel Adams.

That small craft brewery in boston that was formed in 1984.

Samuel Adams is an American brand of beer brewed by the Boston Beer Company (NYSE: SAM) and its associated contract brewers. The company was founded in 1984 by Jim Koch, Harry M. Rubin, and Lorenzo Lamadrid in Boston, Massachusetts, USA. The brand name of Samuel Adams (often abbreviated to Sam Adams, even in advertisements), was chosen in honor of Samuel Adams, anAmerican patriot famous for his role in the American Revolution and Boston Tea Party. According to tradition, he was also a brewer.⁷

Following Anheuser-Busch's 2008 sale to InBev, the Boston Beer Company became the largest American-owned beer company in the United States.

Second largest and oldest is.
D. G. Yuengling & Son is the oldest operating brewing company in America, established in 1829. It is one of the largest breweries by volume in the country, and is the second largest American-owned brewery after the Boston Beer Company, makers of Sam Adamsbeer.⁸ Its headquarters are in Pottsville, Pennsylvania.⁹

So buy american, if you can figure out what that is.

Next time all Detroit All the time! Updates on the house, the Eastern Market and some demolition... oooo POWER TOOLS!

Two weeks of blessings and heat

But now I'm back in Detroit! under the "heat dome". Kind of like the Thunder Dome but without the fun sports angle.

Before I left and Aislinn arrived and the tree fell over a friend from SF who's traveling around the US on a secret project dropped in and we shared some beers, BBQ and a Giants game! He saw them in Chicago (almost going to Zeros rehab start - he doesn't like him to put it mildly) and then came here and we saw them play a crazy game against the Tigers. Both are leading their divisions so that could be a very interesting World series, at least for me ;~)

OK you non baseball fans can wake up again.

So it's not all head and depression. About 5 min away in Grosse Pointe there is a concert in the square every Thur. evening.

This was a jazz orchestra that was in the area for a festival so they booked them for the night.

Eastern Market today

Carrots and Tomatoes $1 a basket

Plums (the over flow from the other bag), Cherry peppers (YES they are back - I already have them pickling) and limes. $3 for the peppers and the limes - the plums come later.

Blackberries, they pushed them on me $1 a basket.

Romaine lettuce and celery, I think $1 each?

OK this is a bit of a ringer. Aislinn wanted Ricotta and none of the cheese vendors had any so I went to R. Hirt Jr. Co.
They are part of the Eastern Market just not part of the Farmers market.

More peppers, Bell and Poblano, some Roma tomatoes and a few Peaches.

And Plums. The guy was selling them for $2 a flat. The flats were about 2 feet by one foot by three or four plums deep. A Jamaican guy and I were looking knowing we couldn't use that many so we decided to split the flat. So all the plums here and above were $1.

Going back in time a bit.

HHDL - DC

It was scorching outside and freezing in the venue. We were in the Verizon Center and it was close enough to walk from the house, which I did quite a bit.

First day there, carpet is going in and the stage is still under construction.

The Front Of House guys. Mixer on the left and lighting on the right.

The control room for video and projections (JumboTron etc.)
In the back left next to the mixing board is where the streaming was being done. The public talks and teachings were streamed live in English, Russian, Chinese, and Vietnamese. Some portions were also uploaded to YouTube.

If you were at the event you could get headsets and have your choice of nine different translations.

What they are looking at. A bunch of cameras and a computer feed for display announcements, schedules etc.

My little corner, actually a room off the control room. Depending on what was going on I'm recording up to 12 tracks including the three streamed translations.

People liked the shoes ;~)

One of the more difficult parts of the adventure was that His holiness is an early riser and no mater what time the schedule says he starts when he wants and ends when he's done. So it's all very flexible. Most of the time our call was 6am but then he started coming earlier. One day the mixers came really early so they could tune some things and when they arrived at 5am HHDL and a bunch of monks were already in place chanting!

But all worked out and it was nice working with consummate professionals. Sometimes you show up and the guys you have to interface with are doing it because they got the short straw and while they are often nice they really don't know anything about sound. These guys were pros who were very good and VERY easy to work with. I only really deal with sound but from what I heard every one was very impressed with the skills of the crew.

Flying back to Detroit. Wow I live in the midwest!? But hey we are eastern time so maybe that is mideast.

I have a video clip of the house with the audience in, packed to the rafters. If I can figure out how to link it up I will.

Later dayz...

Cheers
SK

HHDL and DC

So I'm hanging in the house behind the Masonic temple. I hear it features prominently (the temple not the house) in the second sequel to the da Vinci Code (Lost Symbol).

thats the view, the front is more impressive.

This is not a new disaster but the 4th fireworks as seen (and photoed badly by the phone) from the roof patio of this very cool house I'm staying in.

The phone cant deal with the contrast so it looks a bit like a pre vis of what some folks would like DC to look like.

THis is actually painted trim.

you can tell in this next shot

The kitchen has only one drawback. That huge refrigerator/ freezer in the center sounds as industrial as it looks. The stove burners are like a bunch of turkey friers. Those things get HOT FAST.

Next some shots from the venue

A meassage from on high?

So to start with the latest. I will be doing some catching up because this is
unfortunately our big old Maple tree. Now it's fire wood for some time. That is bad but not as bad as our poor neighbor whose house it landed on.

One branch went right threw his laundry room and the rest ripped off the back of his roof and crushed the deck and kind of wiped the the balcony.

Apparently a lot of people new the tree was rotten and going to fall. Wish this had gotten passed along!

Monty is the only one who really likes the new situation. He can tromp next door and play with the dogs and get treats.

Luckily our neighbor has a good sense of humor.

The storm only lasted a few hours but was a bit too close to a hurricane. Lots of downed trees and 100,000+ with out power. Some places just got the wind and they ended up with fires from the downed power lines. We had so much water so fast that fire wasn't an option, but flooding was. So the tree through your roof is a bigger deal when you also getting a few inches of rain in an hour.

In other news...

For those who remember the studio in it's last colorful stage...

It now looks like IKEA got ahold of it. The floors look great but... It saddens me. Some of those shelves have been with me since the 80's. It was wood and real. Now they looks like some cheap prefab pressboard cookie cutter IKEA junk.
If I had know they would be embarrassed like this I would have taken them down and given them a demise with dignity. I hate it when wood is made to look like Vinyl siding.

OK I'm over it. I knew there would be things like this, there always are. When I was much younger, as in second grade, we moved from one house to the one I mostly grew up in. After it was sold we went back to pick up ? something. Anyway my room was all knotty pine, not the washed down kind that I had later but just the polished wood. So we go in and the new owners are rolling that awful blue green that was everywhere for awhile. Aquamarine puke. All that beautiful wood was going to look like a cheap tract house. Which ever parent was with me must have kicked me to keep me from screaming at them. So this isn't that bad, wasn't great wood but still?

Now in the new disaster home one thing we have planned (big Irony) is removing the white pain that some misguided real-estate agent painted over the 100 year old polished oak trim.

Ah well so it goes.

My internet is dodgy here in DC, but that is another post.